4Kw Metal Cold Roll Forming Machine / Rolling Shutter Making
Machine With Cycloidal Reducer
Uncoiling→Feeding material into machine→Roll forming→Measuring
length→ Auto cutting→Products receiving
|Suitable material||Color steel sheet , galvanized steel sheet,|
|Main motor power||4KW with Cycloidal reducer|
|Hydraulic station power||3KW|
|Thickness of material||0.3mm~0.8mm|
|Diameter of principal axis||Φ70mm|
|Material expand width||1000mm-1250mm|
|Electric tension||380V 3phase 50HZ or as the customer's requirements|
|Material of roller||High grade 45# forged steel (plated chrome plating on surface)|
|Rolling galvanization thickness||0.05mm|
|Processing precision within||10m+/-1.00mm|
|Material of cutting blade||Cr12 mould steel with quenched treatment|
|Kind of drive||1 inch chain link bearing model 6210|
|Roller station||11/15 Roller Statio|
Components and Technical Specification
1. Manual Uncoiler
Usage:It is used to support the steel coil and uncoil it in a
turnable way. The steel coil is uncoiled by hand. Loading
Inner diameter: 500-508mm
2. Feeding Table
Put the raw material(steel plate) through the beach to manufacture
and process, it can guarantee that the products are neat, parallel
and everything is uniformity. Please refer to the equipment
regulation to know the function of locate angle iron.
3. Hydraulic System
Power:4kw,Hydraulic oil: 40#hydraulic oil into the hydraulic oil tank ,the pump drive the
cutter machine to begin the cutting job.
4.Computer Control Cabinet
The target piece`s length is adjustable and digit of it can be
adjusted. Computed mode has two modes: automatic and manual one.
The system is easy to operate and use.
It adopts the hydraulic drive and automatic location to decide the
dimension and cut the target products.
Material of blades: Cr12,quenching treatment
It adopts welded steel and supported roller to transmit the
products,which is used to collect the finished products.