We will do a good job in every aspect, to provide you with a better
quality machine!Galvanized floor deck roll forming equipment is
specialized in the production of building steel deck plate, floor
boards belong to steel construction steel sheeting, V-shaped,
U-shaped, trapezoidal or similar shape of these types waveform,
mainly for permanent formwork, also may be selected for other
purposes. This metal plates are widely used in power plants, power
equipment companies, car showrooms, steel plants, cement warehouse,
steel structure office, airport terminals, railway stations,
stadiums, concert halls, theater, supermarkets, logistics center,
the Olympic sports venues stadiums and other steel construction.
The metal produced by this machine has high strength with big wave
length. It adheres well to concrete. Used on high building, it not
only saves steel model plate, but also reduce the weight of the
storey. With the same bearing capacity, it economized steel and
cuts down investment accordingly.
|No.||item||Parameter(all is subject to our final design)|
|1||Suitable raw material||Type||Common galvanized & pre-painted steel|
|Yield strength||235MPa(or other high strength steel)|
|width(mm)||According to final design|
|2||Manual uncoiler's capacity||Max.5tons|
|3||Forming speed(m/min)||About 18-20m/min|
|4||Main motor power(KW)||7.5kw|
|6||Forming roller groups||Around19-20 groups|
|7||Raw material of forming roller||High quality No.45 steel|
|8||Raw material of cutting blade||Cr12mould steel with quenched treatment|
|9||controlling system||Mitsubishi PLC& converter|
|10||Suitable industrial voltage||According to your special requirement|
|12||Machine weight||About 9-10tons|
Deck forming machine consist of uncoiler, coil sheet guiding
device, main rol forming system, cutting device, hydraulic station,
PLC control system and support table.
1 light weight
2 high strength
3 high loading capacity
4 easy for installation/construction
5 much better than traditional ones
6 excellent appearance
Floor Decking Steel Sheet is roll formed by roll forming machine,
mainly using galvanized steel, at thickness of 0.8/1.0/1.2mm.
Simple shape with high rib and high strength. Put the plate above
the welded wire net, fill cement between them. This panel is
usually used as the floor of high buildings, it can save steel
mound and can also save the weight, in the same loading capacity.
Use this plate, and save the steel quantity, and thus save cost.
We also do our best to customize our products to your requirements.
|1||Suitable material||color steel sheet or galvanized sheet|
|2||Thickness of raw material||0.8-1.2mm|
|3||Uncoiler loading capacity||5000kg (can be increased to 10ton )|
|5||Voltage||380V,3phase,50Hz or as per customer's requirements|
|6||Power requirement||Main motor power: 18.5KW (Depend on final design )|
Hydraulic station power: 5.5KW (Depend on final design )
|7||Controlling system||Mitsubishi PLC & converter|
|8||Machine's size||about 28m*1.5m*1.6m (Depend on final design )|